Oprek PC Menu
Facebook Fans Page
Oprek PC Ads
OprekPC.com Forum Index
  Modifikasi - Tweak - Overclock      Search      Memberlist      Album
  · Log in Register · Profile · Log in to check your private messages · Usergroups  
 Announcement 
Saat ini Anda sudah bisa menikmati layanan RSS Feed di forum OprekPC. Selamat bergabung dengan kami melalui offline mailing news.

Previous topic «» Next topic
Reset Printer Canon
Author Message
balthaZor 
Moderator



Helped: 57 times
Joined: 25 Jan 2005
Posts: 8920
Location: 6 12 16.05 S 106 50 43.22 E
Posted: Fri Oct 07, 2005 1:23 pm   Reset Printer Canon

Dapet info dari temen nee..
cara reset printer Canon.

Canon GENERIC "S" SERIES RESET CODE
Waste Ink Counter Reset.
(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
succession. Note: you are still holding the POWER button). The printer's carriage will "reset"
or move momentarily. If the above was properly performed the printer will enter the
"Service Mode".
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
will alternate (change) color with each key press.
1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon PIXMA iP1000
Waste Ink Counter Reset Manual for Service mode

1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon PIXMA iP1500
Waste Ink Counter Reset. Manual for Service mode

1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.)
should be orange.
5. Press and release the RESUME button again, the indicator
(L.E.D.) should be green
6. Release both buttons

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon i320, i255
Waste Ink Counter Reset.
Step 1 : Manual Temporary
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
or Step 1: Manual Temporary
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

step 2 : Software for Permanant

1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.

Remark "After service mode Pls use software for permanent reset"

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon i850, i950, S600
Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute:
presses - light color - function
Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon S450 Printer
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three times. The indicator should be orange.
7: Press Power to set data

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon BJC 1000 Series
1: Remove Cartridge
2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within 5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon BJC-2000 BJC-2100 Series
1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Close Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon BJC-210 BJC-240 BJC-250 BJC-255 BJC-265
Canon BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550 BJC-4650
Unplug Power Cord
Hold POWER and RESUME buttons
Plug in Power Cord
Release buttons
Open front door of printer
Hold the CARTRIDGE and RESUME buttons
Press POWER
Release all buttons after the beeps
Press CARTRIDGE once
Press RESUME

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon BJC-5000
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon BJC-5100
Self Test
Switch Printer off. Hold Power for 1 beep.

Waste Counter Reset
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon BJC-3000 BJC-6000 BJC-6100 BJC-6200 S400 S450 F300 F600 F620
Canon BJC-7000 BJC-7100 BJC-8000 BJ-F800 i6500

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5: When the indicator lights steady, press RESUME three times. The indicator should be orange.
6: Press Power to set data

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon BJC-600 BJC-600e BJC-610 BJC-620
1: Unplug Power Cord
2: Hold POWER and FF and Print Mode buttons
3: Plug in Power Cord
4: Release after the beeps

++++++++++

Canon BJC-50 BJC-55 BJC-80 BJC-85 M40 M70
1: Unplug Power Cord
2: Hold POWER and RESUME buttons
3: Plug in Power Cord
4: Release buttons after the printers starts up
5: Hold CARTRIDGE and RESUME
6: Press POWER
7: Release all buttons after the beeps
8: Press CARTRIDGE 16 times
9: Press RESUME
10: Unplug the Power cord


++++++++++++++++++++++++++++++++++++++++++++++++++

Canon BJ-30 BJC-35v BJC-70
F14 Error Reset
1: Unplug adapter
2: Hold POWER
3: Plug in ADAPTER
4: Release POWER after printer starts
5: Hold FF and MENU and press POWER
6: Release after beeps
7: Press <> Cartridge until 1A is displayed
8: Press ONLINE
9: Press POWER to shutoff printer
10: Unplug printer then re-plug printer

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon BJ F900, F890, F700, F500, S900, S820, S750 and S520
Turn off the printer.
Press and hold the RESUME button, then press and hold the POWER button.
Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily.
You are now in Service mode.
Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
1. service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)
After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a resta

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA IP3000 above,
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon S900, S820, S750, S520

Turn off the printer.
Press and hold the RESUME button, then press and hold the POWER button.
While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.
The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.
Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.

1. Service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)

After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.


++++++++++++++++++++++++++++++++++++++++++++++++++

Canon S9000

Turn off printer
Hold down Resume button and press Power button.
Keep holding down Power button and let Resume button go.
Press Resume button 2 times then let BOTH buttons go.
Green lights will flash and then stop blinking.
When green lights are solid, press the Resume button 4 times.
Press the Power button and the printer should turn off, if not, press the Power button once more.
Your printer should respond as normal.

++++++++++++++++++++++++++++++++++++++++++++++++++

Canon MPC190
Reset Waste Ink
1) Enter SERVICE MODE.
By pressing Menu Copy Scan Copy Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

_________________

Sempatkan copas URL sumber jika mengutip artikel orang lain..
20090831 SnowLeopard on Abit IP35-E | Intel C2D E6850 | 9600GT
 
 
h3ndr@ 
Oprek Soldier



Helped: 20 times
Age: 26
Joined: 22 Apr 2005
Posts: 4404
Location: Jember - Surabaya
Posted: Fri Oct 07, 2005 4:04 pm   

Can U share the software for permanently reset specially for i255 printer? Thanx
 
 
balthaZor 
Moderator



Helped: 57 times
Joined: 25 Jan 2005
Posts: 8920
Location: 6 12 16.05 S 106 50 43.22 E
Posted: Fri Oct 07, 2005 4:47 pm   

ok.. gimme time for upload :wink: :D
_________________

Sempatkan copas URL sumber jika mengutip artikel orang lain..
20090831 SnowLeopard on Abit IP35-E | Intel C2D E6850 | 9600GT
 
 
balthaZor 
Moderator



Helped: 57 times
Joined: 25 Jan 2005
Posts: 8920
Location: 6 12 16.05 S 106 50 43.22 E
Posted: Sat Oct 08, 2005 4:22 pm   

Canon i255-i320 Reset Tool

:arrow: Canon_i255-i320_reset.exe 4.78MB

_________________

Sempatkan copas URL sumber jika mengutip artikel orang lain..
20090831 SnowLeopard on Abit IP35-E | Intel C2D E6850 | 9600GT
 
 
Palthron 
belajar ng-Oprek



Helped: 5 times
Age: 30
Joined: 11 Apr 2005
Posts: 242
Posted: Sat Oct 08, 2005 4:56 pm   

Tanya : Buat apa direset?
 
 
h3ndr@ 
Oprek Soldier



Helped: 20 times
Age: 26
Joined: 22 Apr 2005
Posts: 4404
Location: Jember - Surabaya
Posted: Sat Oct 08, 2005 8:10 pm   

@oom Balthazor
lha ini jangan2 file reset permanen yg pernah diuplot alic di rs yah? yg bermasalah after reset itu...soalnya katanya abis reset i255 bisa berubah jadi i350 betul ngga tuh oom.

@oom palthron
buat apa direset? ya tergantung kebutuhan aja koq oom, jadi misalnya printernya rusak secara software spt blinker, tempat penampungan tinta buangan yg penuh meskipun sudah dibersihkan menjadi penyebab reset tool itu dibutuhkan...contoh konkritnya printer i255 gw sendiri...abis cabut kabel power atau lepas cartridge (bukan inktank lho), langsung blinker lagi... :twisted:

 
 
balthaZor 
Moderator



Helped: 57 times
Joined: 25 Jan 2005
Posts: 8920
Location: 6 12 16.05 S 106 50 43.22 E
Posted: Mon Oct 10, 2005 10:36 am   

Palthron wrote:
Tanya : Buat apa direset?


AFAIK.. yang direset itu kan chip memory-nya sebagai otaknya..
reset dibutuhin kalo ada printer ada masalah karena pemrogramannya (EEPROM)..
biasanya sih tandanya lampunya blink kuning dan ijo bergantian.
spt di Epson kadang gak bisa ganti tinta kalo cuma satu tank..
-CMIIW-

h3ndr@ wrote:
@oom Balthazor
lha ini jangan2 file reset permanen yg pernah diuplot alic di rs yah? yg bermasalah after reset itu...soalnya katanya abis reset i255 bisa berubah jadi i350 betul ngga tuh oom.


iya bener..
kalo gak ada cara lain, mungkin reseter ini bisa dipake.. :lol:
udah gitu katanya cuma bisa di Win98..

_________________

Sempatkan copas URL sumber jika mengutip artikel orang lain..
20090831 SnowLeopard on Abit IP35-E | Intel C2D E6850 | 9600GT
 
 
h3ndr@ 
Oprek Soldier



Helped: 20 times
Age: 26
Joined: 22 Apr 2005
Posts: 4404
Location: Jember - Surabaya
Posted: Mon Oct 10, 2005 2:30 pm   

huah...kalo gitu ga jadi download deh...abisnya kalo ntar i255 gw raib jadi i350 kagak lucu tuh, otomatis driver juga berubah n susahnya lagi kalo mo tuker tambah gimana? masa i350 mo dikumpulin ma barang2 rongsokan laen lalu masuk museum pribadi?? :lol:
 
 
Palthron 
belajar ng-Oprek



Helped: 5 times
Age: 30
Joined: 11 Apr 2005
Posts: 242
Posted: Mon Oct 10, 2005 3:15 pm   

Ow gitu... arigatouw... *bookmark*
Starting OOTz...
Mr h3ndr@ : Tempat penampungan tinta buangan ada di mana? i455 punya ndak yah? Cara mengosongkan gimana? Makasiiiih......
End of OOTz...

 
 
h3ndr@ 
Oprek Soldier



Helped: 20 times
Age: 26
Joined: 22 Apr 2005
Posts: 4404
Location: Jember - Surabaya
Posted: Mon Oct 10, 2005 5:12 pm   

bookmark? mo diapain tuh oom? mo d/l gitu? heheheh...abis reset siap2 aja bim salabim...

-OOTz-
AFAIK semua printer pasti punya tempat penampungan tinta buangan yg dipake setelah proses head cleaning, atau cuman ngidupin/matiin printer aja. Posisinya ampir semua printer itu sama, dibagian bawah belakang printer tp didalemannya loh jadi kudu bongkar2 printer dulu, kalo masih garansi ya siap2 ilang aja garansinya, tp kalo abis dibongkar kagak bisa kembali lagi itu bukan tanggung jawab ane....kekekekek... :lol: :lol:
-end OOTz-

 
 
Palthron 
belajar ng-Oprek



Helped: 5 times
Age: 30
Joined: 11 Apr 2005
Posts: 242
Posted: Mon Oct 10, 2005 10:29 pm   

Ada reset i455 ndak om :)

Starting OOtz...
Mr.h3ndr@ : Bookmark supaya ga usah nyari-nyari lagi :)
Berarti, kalo misalnya penuh, cara yang seharusnya itu dikirim ke tukang servis?
End of OOTz...

 
 
h3ndr@ 
Oprek Soldier



Helped: 20 times
Age: 26
Joined: 22 Apr 2005
Posts: 4404
Location: Jember - Surabaya
Posted: Tue Oct 11, 2005 1:14 pm   

Yoi emang harus dikirim ke tukang service, tp kalo tukang servicenya Canon terus terang...anda bakalan mati kecekik kalo cuman mo ngebuang tinta buangan yg udah mulai penuh soalnya mereka rata2 minta biaya sekitar 200-300k untuk setiap kali maintenance yg kek begituan... :shock:
 
 
balthaZor 
Moderator



Helped: 57 times
Joined: 25 Jan 2005
Posts: 8920
Location: 6 12 16.05 S 106 50 43.22 E
Posted: Wed Oct 19, 2005 3:05 pm   

Ada nemu reseter baru lagi nee

http://CanonResetter.Terpercaya.Net wrote:
Pada Printer Canon Inkjet Type i250, i255, i320, i350, i355, PIXMA ip1000, ip1500 dan sekelasnya, jumlah pencetakannya akan selalu diakumulasikan hingga batas tertentu. Dan bila sudah mencapai batas yang ditetapkan, maka akan Overload dengan ditandai lampu LED menyala secara bergantian atau disebut dengan BLINKING.

Jika hal ini terjadi, maka Mau tidak mau printer harus dibawa ke service center Canon.
Solusinya anda HARUS MEMILIKI SENDIRI software CANON RESETTER


DOWNLOAD:

Code:
http://jitu.ws/file/canonresetter.zip  18,4 MB

atau
Code:
http://jitu.ws/file/canonresetter.001  1,35 MB
http://jitu.ws/file/canonresetter.002  1,35 MB
http://jitu.ws/file/canonresetter.003  1,35 MB
http://jitu.ws/file/canonresetter.004  1,35 MB
http://jitu.ws/file/canonresetter.005  1,35 MB
http://jitu.ws/file/canonresetter.006  1,35 MB
http://jitu.ws/file/canonresetter.007  1,35 MB
http://jitu.ws/file/canonresetter.008  1,35 MB
http://jitu.ws/file/canonresetter.009  1,35 MB
http://jitu.ws/file/canonresetter.010  1,35 MB
http://jitu.ws/file/canonresetter.011  1,35 MB
http://jitu.ws/file/canonresetter.012  1,35 MB
http://jitu.ws/file/canonresetter.013  1,35 MB
http://jitu.ws/file/canonresetter.014  1,25 MB
http://jitu.ws/file/canonresetter.BAT  1 Kb

Setelah selesai jalankan file canonresetter.BAT untuk
menggabungkan kembali semua file tersebut.


ZIP PASSWORD: www.jitu.ws123

_________________

Sempatkan copas URL sumber jika mengutip artikel orang lain..
20090831 SnowLeopard on Abit IP35-E | Intel C2D E6850 | 9600GT
Last edited by balthaZor on Thu Oct 20, 2005 11:52 am; edited 2 times in total  
 
 
xaviero 
Ensign


Helped: 12 times
Age: 33
Joined: 17 Apr 2005
Posts: 1778
Posted: Thu Oct 20, 2005 11:14 am   

supaya ga penuh waste ink pad nya, "usus" untuk bagian pembuangan tinta taruh diluar body printer aja.... jadinya ga bakalan penuh2 tuh ink pad.

AFAIK, tetapi tiap kali anda ng print, di bagian paper tray ada sebuah pin untuk menghitung sudah berapa banyak kertas yang telah anda masukkan. Untuk kelas bubble jet, counter nya bisa ampe 8300 lembar kertas loh.... lumayan

terus satu lagi, yg di bilang mas balthi, 70% bisa berhasil untuk ng reset canon, 30% nya itu kadang2 karena kesalahan listrik, kesalahan konslet (cacat fisik), atau headprint nya sendiri dah ancur, jadi ga bisa dibenerin lagi.... palingan di kanibal buat printer sejenis.

btw, si pembuat website jitu.ws pasti dongkol nih mas balthie.... udah minta bayaran, kita share aja gratisan disini,.... bener ga ? wong softwarenya aja dari sana dah gratis koq.... :D

 
 
balthaZor 
Moderator



Helped: 57 times
Joined: 25 Jan 2005
Posts: 8920
Location: 6 12 16.05 S 106 50 43.22 E
Posted: Thu Oct 20, 2005 11:41 am   



akhirnya.. ada mas xaviero a.k.a Master of Printer nongol :wink:

gw mo kunsultasi nee..
Printer adikku Canon iP1000 kalo tintanya abis selalu disuntik lagi gak beli orinya,
trus skr gak bisa print warna biru, lama kelamaan jadi gak bisa print sama sekali.
dibawa ke service Canon, katanya printheadnya dah rusak dan ini gak termasuk garansi.
kalo ganti printhead baru, harganya hampir sama ma harga printernya sendiri.

bener udah gak bisa diapa-apain ya? cuma dgn cara kanibal? :cry:
kayaknya ntar mo beli printer HP aja deh!

Bro, bikin thread baru lagi dong.. ngebahas printer HP :D

_________________

Sempatkan copas URL sumber jika mengutip artikel orang lain..
20090831 SnowLeopard on Abit IP35-E | Intel C2D E6850 | 9600GT
 
 
h3ndr@ 
Oprek Soldier



Helped: 20 times
Age: 26
Joined: 22 Apr 2005
Posts: 4404
Location: Jember - Surabaya
Posted: Thu Oct 20, 2005 1:11 pm   

@balthazor
oom, itu reseternya yg aman kan? atau sama aja yg bisa sulapan jadi i350 lagi... :?: and bisa jalan under winxp nggak?

Masalah tinta suntik...koq ane masih belom pernah ngalamin yah? malahan setelah dipasangin infus malah tintanya banjir2 tp headnya ga pernah trouble...tp gw pernah dikasih tahu ttg i255 kan belinya sekitar 400k nah kalo ganti headnya aja bisa sampe 300k gitu deh...weleh2 :?

 
 
balthaZor 
Moderator



Helped: 57 times
Joined: 25 Jan 2005
Posts: 8920
Location: 6 12 16.05 S 106 50 43.22 E
Posted: Thu Oct 20, 2005 1:17 pm   

baru aja dpt Bro.. blom dites, blom dpt "kelinci percobaan" :P

tapi emang kualitas tinta suntik ma ori beda banget yah..
kalo print di kertas glossy, tinta suntik gak nyerap jadi blepotan,
beda ma yang ori, nyerap & cepet kering.

_________________

Sempatkan copas URL sumber jika mengutip artikel orang lain..
20090831 SnowLeopard on Abit IP35-E | Intel C2D E6850 | 9600GT
 
 
xaviero 
Ensign


Helped: 12 times
Age: 33
Joined: 17 Apr 2005
Posts: 1778
Posted: Thu Oct 20, 2005 4:46 pm   

euy, kalo hp trik reset nya agak ribet.... hehehe hanya seri2 tertentu aja yg bisa....

eh, kalo lampu blinking kan dah tahu cara ngilanginnya kan ?!?

nah kalo tuh printer masih nyala dan headprint nya masih bisa gerak (ketahuan pas power on), masih ada peluang 90% buat dia balik normal.

trik buat ip1000, dan printer canon lainnya

buka printheadnya.
abis tuh, lepasin cartridge nya.
nah ntar dibagian atas nozzle, ada yg kayak saringan gitu kan, buka lagi kepala karetnya.
abis tuh rendem air panas (jangan suam2 kuku) headnya (hanya bagian nozzlenya), kira2 5mm selama 1-2 menit, liat sendiri deh di airnya, warna apa aja yg udah cair.....

terus, biarin aja, lakukan minimal 2x. awas, ngrendam nya jangan kedalemannya yach, ntar kena chip bisa rusak permanen.

rendaman ke-2x di air panas bersih ini, liat aja, masih ada tinta yg keluar ga ? kalo ada, rendem lagi aja, diemin (sambil dipegang yah, ntar nyemplung tanggung sendiri).

abis tuh keringin sekering2nya.... bole pake hairdryer , bole pake kipas, boleh pake AC, bole pake mulut....
pasangin lagi karet yg tadi ditempatnya semula. pasang cartridge terus tes print.

kalo masih belum keluar, coba liat dulu, tinta apa yg masih ngadat....
ulangin prosedur diatas, tapi ada perubahan dikit.
tambahin alcohol ditempat cartridge nya sambil direndam air panas,
ini biar ada dorongan dari atas, dan dari bawah biar cepat cair....

keringin lagi, terus tes print....
kalo masi ga mau lagi, pancing pake tinta langsung,.... caranya

tetesin tinta sesuai warna pada tempatnya langsung. misal hitam yah di hitam donk, merah - merah dst.... pake alat suntikan aja, ini buat ngtes apa saluran nozzle buat ke headnya masih mampet apa engga.

pasang balik cartridge nya terus tes print, kalo belum keluar, pake deep head cleaning 2-3x . terus tes print lagi.... gud luck ya mas balthie....

eh, btw, ane bukan master of printer.... cuman tukang serpis biasa2 aja.
:wink:

 
 
xaviero 
Ensign


Helped: 12 times
Age: 33
Joined: 17 Apr 2005
Posts: 1778
Posted: Thu Oct 20, 2005 4:50 pm   

pake resetter yg mas balthie bilang,
i255 memang kudu jadi i350, donlod aja drivernya ga besar koq..
di http://www.soft32.com cari aja driver i350 ada yg untuk xp/2k ada yg buat 98/ME

aku dah ngreset banyak i255, ngreset kudu pake system 98/me ga bisa di xp. hasil printan nya sih sama aja ama i255, tapi lebih cepet koq ngprint pake i350. cuma nambah 1ppm buat black :D mayan kan ?!?!

 
 
xaviero 
Ensign


Helped: 12 times
Age: 33
Joined: 17 Apr 2005
Posts: 1778
Posted: Thu Oct 20, 2005 4:57 pm   

buat yg pake infus, si "usus besar" nya printer kudu tarur diluar body, biar bisa langsung ditampung pake wadah....

jadi ga bakalan banjirin printer, tau kan cara buka body i255???

 
 
balthaZor 
Moderator



Helped: 57 times
Joined: 25 Jan 2005
Posts: 8920
Location: 6 12 16.05 S 106 50 43.22 E
Posted: Thu Oct 20, 2005 4:59 pm   

waa.. cuma yang udah bangkotan yang tau trik beginian.. :D
ntar langsung dipraktekin.

tp printernya ada di Bandung, jadi yang mraktekin biar adikku aja..
makasih banyak ya..

btw, Mas xaviero=Onowiy ya? sori kalo bukan :wink:

_________________

Sempatkan copas URL sumber jika mengutip artikel orang lain..
20090831 SnowLeopard on Abit IP35-E | Intel C2D E6850 | 9600GT
 
 
xaviero 
Ensign


Helped: 12 times
Age: 33
Joined: 17 Apr 2005
Posts: 1778
Posted: Thu Oct 20, 2005 5:05 pm   

guju guneng, masi muda gini dibilang bangkotan :D


ini bukan mas onowiy, hehehhe.... salah orang :P

oh ya, lupa, soal merk tinta kompatibel buat nyuntik nih....
selama ini ane nyobain...
yg bisa ngrusak printer nih tinta2 berikut :
eprint, print ink, acacia, veneta, ama yg abal2 lain (banyak sih)

yg sampe saat ini cukup bagus
dataprint, ndm, rainbow, mipo, blue print (baru 5 merk itu yg dicobain)

 
 
h3ndr@ 
Oprek Soldier



Helped: 20 times
Age: 26
Joined: 22 Apr 2005
Posts: 4404
Location: Jember - Surabaya
Posted: Fri Oct 21, 2005 11:17 am   

@oom xaviero
Bongkar body udah pernah sih tp sedotan yg buad nyedot tinta dari printhead (yg buad proses cleaning) itu malah lepas n ga bisa balikin lagi...terpaksa gw bawa ke toko kompie langganan (untung serpis gretong) :lol:

Gw pake inpus sih tp sampe sekarang masih ga dipasang soalnya beli tinta 200ml abis itu mo pas dipasang di printernya, tinta ga keluar eehhh...malah itemnya yg bolak-balik bocor...tp yg warna ga pernah bocor, apa gara2 nozzle itemnya kegedean yah....tambang bingun ane.... :?

 
 
xaviero 
Ensign


Helped: 12 times
Age: 33
Joined: 17 Apr 2005
Posts: 1778
Posted: Fri Oct 21, 2005 10:44 pm   

pake jenis infus yg spongless bukan ??? kalo iya, kemungkinan sih per nya dah ga main, coba deh ganti per nya (kalo ga mau ganti infus nya)

kalo masih pake infus tempo doeloe, yg tidak spongeless, kemungkinan karet penahan tintanya dah dollllll alias dah longgar.... (biasanya printer epson yg begini)

mangnya printer nya epson apa canon sih ?!?!?

 
 
h3ndr@ 
Oprek Soldier



Helped: 20 times
Age: 26
Joined: 22 Apr 2005
Posts: 4404
Location: Jember - Surabaya
Posted: Fri Oct 21, 2005 11:32 pm   

pan udah ane bilang printernya i255 pastina Canon donk...

Spongless itu yg kek pegimana yah? pokoke di ink tanknya ga ada spoons kayak yg biasa ada di ink tank original atau compatibel (ink tank tembus pandang dan di dalemnya ada kayak semacam jalur2 khusus tinta gitu). mungkin termasuk tipe I tuh yg pake per...cara gantinya gimana yah...btw dari pertama beli ampe sekarang ga pernah dipake masa perna udah longgar?

Huh...tau gini gw ga bakalan nekad pasangin i255 ama inpusan deh...mendingan beli epson dulu aja buad pasangin inpusan lebih gampang...

 
 
Display posts from previous:   
Reply to topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
Add this topic to your bookmarks
Printable version

Jump to:  



Powered by phpBB modified by Przemo © 2003 phpBB Group
Template modified by Mich@³
Customized by OprekPC @ 2007
Page generated in 0.37 second. SQL queries: 14